creating vm on kvm hosts with kickstart file.

libvrt-install can be used to provision kickstart while installing this provides a answer file to all the settings required to install os.

kickstart file will have the information of partition layout, username , password etc..

here is my kickstart file

cat /var/www/html/pub/anaconda-ks.cfg
#version=DEVEL
# System authorization information
auth --enableshadow --passalgo=sha512
# Use CDROM installation media
cdrom
# Use text mode install
text
# Run the Setup Agent on first boot
firstboot --enable
ignoredisk --only-use=vda
# Keyboard layouts
keyboard --vckeymap=us --xlayouts=''
# System language
lang en_US.UTF-8

# Network information
network  --bootproto=dhcp --device=eth0 --ipv6=auto --no-activate
network  --hostname=localhost.localdomain

# Root password
rootpw --iscrypted $6$pufROlQv24BRI6uK$Elb0hd.zykBQLyTZeAP8yju5nzGZjHfvtXgATbX3dS4XWT10UHCdGxzK1tQRjGWYvE6YifMvmNOnEZCgTksAd1
# System services
services --enabled="chronyd"
# Do not configure the X Window System
skipx
# System timezone
timezone Asia/Kolkata --isUtc
user --groups=wheel --name=cipher --password=$6$.tFpVw3SgsyVqxmZ$DmE.y6S0lJ26LcXmBCpcFGvvVdXQtdAaIp4YqaKDCHfufXZWWrnARn.wIkgAlfmD45EJokbznKiQnFeeED3p/0 --iscrypted --gecos="Pawan Kumar v"
# System bootloader configuration
bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=vda
autopart --type=thinp
# Partition clearing information
clearpart --all --initlabel --drives=vda

%packages
@core
chrony
kexec-tools

%end

%addon com_redhat_kdump --enable --reserve-mb='auto'

%end

%anaconda
pwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty
pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok
pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
%end

Lets create a vm from virt install in this demo i am using a lvm partition and iso image.

virt-install --name linux2 --ram 512 --disk path=/dev/store/linux2 --vcpus 2 --os-type linux --os-variant rhel7 --network network=default  --graphics none  --console pty,target_type=serial --location '/home/cipher/CentOS-7-x86_64-Minimal-1708.iso' --initrd-inject '/var/www/html/pub/ks.cfg' --extra-args 'console=ttyS0,115200n8 serial'  --extra-args 'ks=file:/ks.cfg' --accelerate
$virt-install --name linux2 --ram 512 --disk path=/dev/store/linux2 --vcpus 2 --os-type linux --os-variant rhel7 --network network=default  --graphics none  --console pty,target_type=serial --location '/home/cipher/CentOS-7-x86_64-Minimal-1708.iso' --initrd-inject '/var/www/html/pub/ks.cfg' --extra-args 'console=ttyS0,115200n8 serial'  --extra-args 'ks=file:/ks.cfg' --accelerate 

Starting install...
Retrieving file .treeinfo...                                                                                                                                                                         |  354 B  00:00:00     
Retrieving file vmlinuz...                                                                                                                                                                           | 5.6 MB  00:00:00     
Retrieving file initrd.img...                                                                                                                                                                        |  46 MB  00:00:00     
Connected to domain linux2
Escape character is ^]
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0-693.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Aug 22 21:09:27 UTC 2017
[    0.000000] Command line: console=ttyS0,115200n8 serial ks=file:/ks.cfg
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd9000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: last_pfn = 0x1ffd9 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f6bd0-0x000f6bdf] mapped at [ffff8800000f6bd0]
[    0.000000] RAMDISK: [mem 0x1d19e000-0x1ffcffff]
[    0.000000] Early table checksum verification disabled
[    0.000000] ACPI: RSDP 00000000000f69c0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000001ffe1508 0002C (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000001ffe1414 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000001ffe0040 013D4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 000000001ffe0000 00040
[    0.000000] ACPI: APIC 000000001ffe1488 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffd8fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1d177000-0x1d19dfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1d127001, primary cpu clock
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1ffd8fff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x1ffd8fff]
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88001ce00000 s97048 r8192 d29928 u1048576
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1ce0f440
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128866
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: console=ttyS0,115200n8 serial ks=file:/ks.cfg
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 450844k/524132k available (6886k kernel code, 392k absent, 72896k reserved, 4545k data, 1764k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:327936 nr_irqs:440 0
[    0.000000] Console: colour *CGA 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Detected 1795.568 MHz processor
[    0.003000] Calibrating delay loop (skipped) preset value.. 3591.13 BogoMIPS (lpj=1795568)
[    0.003000] pid_max: default: 32768 minimum: 301
[    0.003133] Security Framework initialized
[    0.004000] SELinux:  Initializing.
[    0.004000] Yama: becoming mindful.
[    0.004000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.004504] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.005000] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.005023] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.007099] Initializing cgroup subsys memory
[    0.008027] Initializing cgroup subsys devices
[    0.009011] Initializing cgroup subsys freezer
[    0.010000] Initializing cgroup subsys net_cls
[    0.010013] Initializing cgroup subsys blkio
[    0.011000] Initializing cgroup subsys perf_event
[    0.011000] Initializing cgroup subsys hugetlb
[    0.011029] Initializing cgroup subsys pids
[    0.012000] Initializing cgroup subsys net_prio
[    0.012000] mce: CPU supports 10 MCE banks
[    0.012137] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.013000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.013000] tlb_flushall_shift: -1
[    0.013000] Freeing SMP alternatives: 24k freed
[    0.034902] ACPI: Core revision 20130517
[    0.038304] ACPI: All ACPI Tables successfully acquired
[    0.041108] ftrace: allocating 26584 entries in 104 pages
[    0.054148] smpboot: Max logical packages: 2
[    0.057458] Enabling x2apic
[    0.058000] Enabled x2apic
[    0.058012] Switched APIC routing to physical x2apic.
[    0.063742] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064006] smpboot: CPU0: Intel Celeron_4x0 (Conroe/Merom Class Core 2) (fam: 06, model: 0f, stepping: 03)
[    0.069000] APIC calibration not consistent with PM-Timer: 98ms instead of 100ms
[    0.069000] APIC delta adjusted to PM-Timer: 6249953 (6136864)
[    0.069245] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.075826] smpboot: Booting Node   0, Processors  #1 OK
[    0.003000] kvm-clock: cpu 1, msr 0:1d127041, secondary cpu clock
[    0.081000] TSC synchronization [CPU#0 -> CPU#1]:
[    0.081000] Measured 137 cycles TSC warp between CPUs, turning off TSC clock.
[    0.081000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.082039] Brought up 2 CPUs
[    0.083008] smpboot: Total of 2 processors activated (7182.27 BogoMIPS)
[    0.085021] KVM setup async PF for cpu 1
[    0.086000] kvm-stealtime: cpu 1, msr 1cf0f440
[    0.091149] devtmpfs: initialized
[    0.096659] EVM: security.selinux
[    0.097005] EVM: security.ima
[    0.098004] EVM: security.capability
[    0.101640] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.102015] pinctrl core: initialized pinctrl subsystem
[    0.104006] RTC time: 11:51:59, date: 03/31/18
[    0.105199] NET: Registered protocol family 16
[    0.107481] ACPI: bus type PCI registered
[    0.108008] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.110037] PCI: Using configuration type 1 for base access
[    0.116171] ACPI: Added _OSI(Module Device)
[    0.117019] ACPI: Added _OSI(Processor Device)
[    0.118016] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.119008] ACPI: Added _OSI(Processor Aggregator Device)
[    0.123272] ACPI: Interpreter enabled
[    0.124025] ACPI: (supports S0 S5)
[    0.125006] ACPI: Using IOAPIC for interrupt routing
[    0.126048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.132290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.133016] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.134016] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.135034] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.137303] acpiphp: Slot [2] registered
[    0.138099] acpiphp: Slot [4] registered
[    0.139056] acpiphp: Slot [5] registered
[    0.140046] acpiphp: Slot [6] registered
[    0.141073] acpiphp: Slot [7] registered
[    0.142061] acpiphp: Slot [8] registered
[    0.143094] acpiphp: Slot [9] registered
[    0.144099] acpiphp: Slot [10] registered
[    0.145084] acpiphp: Slot [11] registered
[    0.146064] acpiphp: Slot [12] registered
[    0.147059] acpiphp: Slot [13] registered
[    0.148075] acpiphp: Slot [14] registered
[    0.149064] acpiphp: Slot [15] registered
[    0.150059] acpiphp: Slot [16] registered
[    0.151059] acpiphp: Slot [17] registered
[    0.152059] acpiphp: Slot [18] registered
[    0.153058] acpiphp: Slot [19] registered
[    0.154058] acpiphp: Slot [20] registered
[    0.155064] acpiphp: Slot [21] registered
[    0.156072] acpiphp: Slot [22] registered
[    0.157060] acpiphp: Slot [23] registered
[    0.158060] acpiphp: Slot [24] registered
[    0.159059] acpiphp: Slot [25] registered
[    0.160058] acpiphp: Slot [26] registered
[    0.161058] acpiphp: Slot [27] registered
[    0.163013] acpiphp: Slot [28] registered
[    0.164066] acpiphp: Slot [29] registered
[    0.165080] acpiphp: Slot [30] registered
[    0.166061] acpiphp: Slot [31] registered
[    0.167045] PCI host bridge to bus 0000:00
[    0.168011] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.169016] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.170013] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.171008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.172029] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.192093] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.193024] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.195008] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.196008] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.198898] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.199040] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.350306] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.352563] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.355040] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.357281] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.359400] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.361748] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.362181] vgaarb: loaded
[    0.364130] SCSI subsystem initialized
[    0.366057] ACPI: bus type USB registered
[    0.367071] usbcore: registered new interface driver usbfs
[    0.368044] usbcore: registered new interface driver hub
[    0.369070] usbcore: registered new device driver usb
[    0.371160] PCI: Using ACPI for IRQ routing
[    0.373449] NetLabel: Initializing
[    0.374005] NetLabel:  domain hash size = 128
[    0.375004] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.376033] NetLabel:  unlabeled traffic allowed by default
[    0.377055] amd_nb: Cannot enumerate AMD northbridges
[    0.379103] Switched to clocksource kvm-clock
[    0.392500] pnp: PnP ACPI init
[    0.394201] ACPI: bus type PNP registered
[    0.397426] pnp: PnP ACPI: found 5 devices
[    0.399314] ACPI: bus type PNP unregistered
[    0.416165] NET: Registered protocol family 2
[    0.418752] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.422293] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[    0.425563] TCP: Hash tables configured (established 4096 bind 4096)
[    0.428780] TCP: reno registered
[    0.430419] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.433362] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.436632] NET: Registered protocol family 1
[    0.438889] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.441909] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.444837] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.497276] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.598729] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.712376] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.831233] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.883722] Unpacking initramfs...
[    7.043179] Freeing initrd memory: 47304k freed
[    7.108158] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    7.111363] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[    7.115250] futex hash table entries: 512 (order: 3, 32768 bytes)
[    7.118253] Initialise system trusted keyring
[    7.120307] audit: initializing netlink socket (disabled)
[    7.122844] type=2000 audit(1522497126.467:1): initialized
[    7.162693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    7.167511] zpool: loaded
[    7.168803] zbud: loaded
[    7.170232] VFS: Disk quotas dquot_6.5.2
[    7.172108] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    7.175255] msgmni has been set to 972
[    7.177105] Key type big_key registered
[    7.182833] NET: Registered protocol family 38
[    7.184949] Key type asymmetric registered
[    7.186835] Asymmetric key parser 'x509' registered
[    7.189230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    7.192792] io scheduler noop registered
[    7.194631] io scheduler deadline registered (default)
[    7.197117] io scheduler cfq registered
[    7.199136] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.201698] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    7.204942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    7.208284] ACPI: Power Button [PWRF]
[    7.210321] GHES: HEST is not enabled!
[    7.212258] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    7.250641] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    7.254745] Non-volatile memory driver v1.3
[    7.257174] Linux agpgart interface v0.103
[    7.260363] crash memory driver: version 1.1
[    7.262437] rdac: device handler registered
[    7.266129] hp_sw: device handler registered
[    7.268121] emc: device handler registered
[    7.270019] alua: device handler registered
[    7.272062] libphy: Fixed MDIO Bus: probed
[    7.274821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.277713] ehci-pci: EHCI PCI platform driver
[    7.329372] ehci-pci 0000:00:03.7: EHCI Host Controller
[    7.332037] ehci-pci 0000:00:03.7: new USB bus registered, assigned bus number 1
[    7.335964] ehci-pci 0000:00:03.7: irq 11, io mem 0xfebc1000
[    7.344346] ehci-pci 0000:00:03.7: USB 2.0 started, EHCI 1.00
[    7.347133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.350211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.353455] usb usb1: Product: EHCI Host Controller
[    7.355733] usb usb1: Manufacturer: Linux 3.10.0-693.el7.x86_64 ehci_hcd
[    7.358759] usb usb1: SerialNumber: 0000:00:03.7
[    7.361251] hub 1-0:1.0: USB hub found
[    7.363036] hub 1-0:1.0: 6 ports detected
[    7.365347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.370337] ohci-pci: OHCI PCI platform driver
[    7.372413] uhci_hcd: USB Universal Host Controller Interface driver
[    7.425058] uhci_hcd 0000:00:03.0: UHCI Host Controller
[    7.427692] uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    7.431107] uhci_hcd 0000:00:03.0: detected 2 ports
[    7.433483] uhci_hcd 0000:00:03.0: irq 11, io base 0x0000c0a0
[    7.436473] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    7.439752] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.443175] usb usb2: Product: UHCI Host Controller
[    7.445531] usb usb2: Manufacturer: Linux 3.10.0-693.el7.x86_64 uhci_hcd
[    7.448754] usb usb2: SerialNumber: 0000:00:03.0
[    7.451379] hub 2-0:1.0: USB hub found
[    7.453169] hub 2-0:1.0: 2 ports detected
[    7.507305] uhci_hcd 0000:00:03.1: UHCI Host Controller
[    7.510165] uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    7.514943] uhci_hcd 0000:00:03.1: detected 2 ports
[    7.518519] uhci_hcd 0000:00:03.1: irq 10, io base 0x0000c0c0
[    7.523182] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    7.527918] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.532501] usb usb3: Product: UHCI Host Controller
[    7.535951] usb usb3: Manufacturer: Linux 3.10.0-693.el7.x86_64 uhci_hcd
[    7.540175] usb usb3: SerialNumber: 0000:00:03.1
[    7.542937] hub 3-0:1.0: USB hub found
[    7.545070] hub 3-0:1.0: 2 ports detected
[    7.600160] uhci_hcd 0000:00:03.2: UHCI Host Controller
[    7.603086] uhci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    7.607994] uhci_hcd 0000:00:03.2: detected 2 ports
[    7.611423] uhci_hcd 0000:00:03.2: irq 10, io base 0x0000c0e0
[    7.615738] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    7.620348] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.625040] usb usb4: Product: UHCI Host Controller
[    7.628347] usb usb4: Manufacturer: Linux 3.10.0-693.el7.x86_64 uhci_hcd
[    7.631893] usb usb4: SerialNumber: 0000:00:03.2
[    7.634579] hub 4-0:1.0: USB hub found
[    7.636477] hub 4-0:1.0: 2 ports detected
[    7.638863] usbcore: registered new interface driver usbserial
[    7.641733] usbcore: registered new interface driver usbserial_generic
[    7.644968] usbserial: USB Serial support registered for generic
[    7.648327] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.654160] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.656561] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.659308] mousedev: PS/2 mouse device common for all mice
[    7.663197] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    7.664859] rtc_cmos 00:00: RTC can wake from S4
[    7.670700] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    7.672223] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2
[    7.673242] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[    7.683036] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram
[    7.687652] cpuidle: using governor menu
[    7.689970] hidraw: raw HID events driver (C) Jiri Kosina
[    7.693028] usbcore: registered new interface driver usbhid
[    7.695925] usbhid: USB HID core driver
[    7.698109] drop_monitor: Initializing network drop monitor service
[    7.701711] TCP: cubic registered
[    7.703511] Initializing XFRM netlink socket
[    7.705978] NET: Registered protocol family 10
[    7.708794] NET: Registered protocol family 17
[    7.711794] microcode: CPU0 sig=0x6f3, pf=0x1, revision=0x1
[    7.714218] microcode: CPU1 sig=0x6f3, pf=0x1, revision=0x1
[    7.717436] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.722813] Loading compiled-in X.509 certificates
[    7.725497] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[    7.730679] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[    7.737015] Loaded X.509 cert 'CentOS Linux kernel signing key: da187dca7dbe53ab05bd13bd0c4e21f422b6a49c'
[    7.741904] registered taskstats version 1
[    7.756030] Key type trusted registered
[    7.770675] Key type encrypted registered
[    7.784817] IMA: No TPM chip found, activating TPM-bypass!
[    7.790064]   Magic number: 10:815:884
[    7.792334] rtc_cmos 00:00: setting system clock to 2018-03-31 11:52:07 UTC (1522497127)
[    7.801761] Freeing unused kernel memory: 1764k freed
[    7.818272] random: systemd: uninitialized urandom read (16 bytes read)
[    7.824171] random: systemd: uninitialized urandom read (16 bytes read)
[    7.827259] random: systemd: uninitialized urandom read (16 bytes read)
[    7.832608] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    7.840603] systemd[1]: Detected virtualization kvm.
[    7.842665] systemd[1]: Detected architecture x86-64.
[    7.844791] systemd[1]: Running in initial RAM disk.

Welcome to CentOS Linux 7 (Core) dracut-033-502.el7 (Initramfs)!

[    7.851122] systemd[1]: No hostname configured.
[    7.853236] systemd[1]: Set hostname to <localhost>.
[    7.855699] systemd[1]: Initializing machine ID from KVM UUID.
[    7.874713] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    7.955360] random: systemd: uninitialized urandom read (16 bytes read)
[    7.958446] random: systemd: uninitialized urandom read (16 bytes read)
[    7.961467] random: systemd: uninitialized urandom read (16 bytes read)
[    7.964578] random: systemd: uninitialized urandom read (16 bytes read)
[    7.970221] random: systemd: uninitialized urandom read (16 bytes read)
[    7.973864] random: systemd: uninitialized urandom read (16 bytes read)
[    7.987430] systemd[1]: Cannot add dependency job for unit blk-availability.service, ignoring: Unit not found.
[  OK  ] Reached target Local File Systems.
[    7.995948] systemd[1]: Reached target Local File Systems.
[    7.998498] systemd[1]: Starting Local File Systems.
[  OK  ] Created slice Root Slice.
[    8.004095] systemd[1]: Created slice Root Slice.
[    8.006328] systemd[1]: Starting Root Slice.
[  OK  ] Listening on udev Control Socket.
[    8.011546] systemd[1]: Listening on udev Control Socket.
[    8.014048] systemd[1]: Starting udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[    8.019239] systemd[1]: Listening on udev Kernel Socket.
[    8.021499] systemd[1]: Starting udev Kernel Socket.
[  OK  ] Reached target Swap.
[    8.026549] systemd[1]: Reached target Swap.
[    8.028540] systemd[1]: Starting Swap.
[  OK  ] Reached target Encrypted Volumes.
[    8.033392] systemd[1]: Reached target Encrypted Volumes.
[    8.035896] systemd[1]: Starting Encrypted Volumes.
[  OK  ] Reached target Timers.
[    8.040896] systemd[1]: Reached target Timers.
[    8.042966] systemd[1]: Starting Timers.
[  OK  ] Listening on Journal Socket.
[    8.047878] systemd[1]: Listening on Journal Socket.
[    8.050183] systemd[1]: Starting Journal Socket.
[  OK  ] Created slice System Slice.
[    8.055535] systemd[1]: Created slice System Slice.
[    8.057843] systemd[1]: Starting System Slice.
[  OK  ] Reached target Slices.
[    8.062699] systemd[1]: Reached target Slices.
[    8.064769] systemd[1]: Starting Slices.
[    8.069457] systemd[1]: Starting dracut cmdline hook...
         Starting dracut cmdline hook...
[    8.076920] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    8.088168] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required st... nodes for the current kernel...
[    8.103334] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    8.121840] systemd[1]: Starting Setup Virtual Console...
         Starting Setup Virtual Console...
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[    8.155740] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  OK  ] Started Apply Kernel Variables.
[    8.173120] systemd[1]: Started Apply Kernel Variables.
[  OK  ] Started Setup Virtual Console.
[    8.179399] systemd[1]: Started Setup Virtual Console.
[  OK  ] Started Journal Service.
[    8.185610] systemd[1]: Started Journal Service.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
[    8.490338] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    8.677186] dracut-cmdline[82]: Warning: 'serial' is deprecated and has been removed.
[    8.682087] dracut-cmdline[82]: Warning: To change the console use 'console=' instead.
[  OK  ] Started dracut cmdline hook.[   10.710344] random: fast init done

         Starting dracut pre-udev hook...
[   10.798493] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   10.822159] Loading iSCSI transport class v2.0-870.
[   10.841061] iscsi: registered transport (tcp)
[   11.012627] FDC 0 is a S82078B
[   11.037725] No iBFT detected.
[   11.078813] async_tx: api initialized (async)
[   11.084944] xor: measuring software checksum speed
[   11.097029]    prefetch64-sse:  7040.000 MB/sec
[   11.109028]    generic_sse:  5876.000 MB/sec
[   11.110973] xor: using function: prefetch64-sse (7040.000 MB/sec)
[   11.150040] raid6: sse2x1   gen()  3121 MB/s
[   11.169027] raid6: sse2x2   gen()  3316 MB/s
[   11.187030] raid6: sse2x4   gen()  5570 MB/s
[   11.188988] raid6: using algorithm sse2x4 gen() (5570 MB/s)
[   11.191490] raid6: using ssse3x2 recovery algorithm
[   11.292163] device-mapper: uevent: version 1.0.3
[   11.294898] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[   11.381440] device-mapper: multipath round-robin: version 1.2.0 loaded
[   11.574519] RPC: Registered named UNIX socket transport module.
[   11.577277] RPC: Registered udp transport module.
[   11.579423] RPC: Registered tcp transport module.
[   11.581568] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  OK  ] Started dracut pre-udev hook.
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
         Starting dracut pre-trigger hook...
[  OK  ] Started dracut pre-trigger hook.
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Reached target Sockets.
         Starting Show Plymouth Boot Screen...
         Starting Device-Mapper Multipath Device Controller...
         Mounting Configuration File System...
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
[  OK  ] Started Device-Mapper Multipath Device Controller.
         Starting Open-iSCSI...
[   13.171932] scsi host0: ata_piix
[   13.174935] scsi host1: ata_piix
[   13.176591] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[   13.180087] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[  OK  ] Started Open-iSCSI.
         Starting dracut initqueue hook...
[   13.345863] ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[   13.350098] ata1.00: configured for MWDMA2
[   13.358956] scsi 0:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[   13.549925] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[   13.553704] cdrom: Uniform CD-ROM driver Revision: 3.20
[   13.609358] 8021q: 802.1Q VLAN Support v1.8
[   13.963916] 8021q: adding VLAN 0 to HW filter on device eth0
[   19.423149] dracut-initqueue[569]: mount: /dev/sr0 is write-protected, mounting read-only
[   19.826050] loop: module loaded
[  OK  ] Started dracut initqueue hook.
         Starting dracut pre-mount hook...
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Started dracut pre-mount hook.
[  OK  ] Reached target Initrd Root File System.
         Starting Reload Configuration from the Real Root...
[  OK  ] Started Reload Configuration from the Real Root.
         Starting dracut mount hook...
[  OK  ] Reached target Initrd File Systems.
[   21.537392] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Started dracut mount hook.
[  OK  ] Reached target Initrd Default Target.
         Starting dracut pre-pivot and cleanup hook...
[  OK  ] Started dracut pre-pivot and cleanup hook.
         Starting Cleaning Up and Shutting Down Daemons...
[  OK  ] Stopped target Timers.
         Starting Plymouth switch root service...
[  OK  ] Stopped Cleaning Up and Shutting Down Daemons.
[  OK  ] Stopped dracut pre-pivot and cleanup hook.
         Stopping dracut pre-pivot and cleanup hook...
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target Remote File Systems (Pre).
[  OK  ] Stopped target Initrd Default Target.
[  OK  ] Stopped dracut mount hook.
         Stopping dracut mount hook...
[  OK  ] Stopped dracut pre-mount hook.
         Stopping dracut pre-mount hook...
[  OK  ] Stopped dracut initqueue hook.
         Stopping dracut initqueue hook...
         Stopping Open-iSCSI...
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Slices.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Open-iSCSI iscsiuio Socket.
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Apply Kernel Variables...
[  OK  ] Stopped target Encrypted Volumes.
[  OK  ] Stopped target Local File Systems.
[  OK  ] Stopped target Swap.
[  OK  ] Started Plymouth switch root service.
[  OK  ] Stopped Open-iSCSI.
         Stopping Device-Mapper Multipath Device Controller...
[  OK  ] Stopped Device-Mapper Multipath Device Controller.
[  OK  ] Stopped udev Coldplug all Devices.
         Stopping udev Coldplug all Devices...
[  OK  ] Stopped dracut pre-trigger hook.
         Stopping dracut pre-trigger hook...
         Stopping udev Kernel Device Manager...
[  OK  ] Stopped udev Kernel Device Manager.
[  OK  ] Stopped dracut pre-udev hook.
         Stopping dracut pre-udev hook...
[  OK  ] Stopped dracut cmdline hook.
         Stopping dracut cmdline hook...
[  OK  ] Stopped Create Static Device Nodes in /dev.
         Stopping Create Static Device Nodes in /dev...
[  OK  ] Stopped Create list of required sta...ce nodes for the current kernel.
         Stopping Create list of required st... nodes for the current kernel...
[  OK  ] Closed udev Kernel Socket.
[  OK  ] Closed udev Control Socket.
         Starting Cleanup udevd DB...
[  OK  ] Started Cleanup udevd DB.
[  OK  ] Reached target Switch Root.
         Starting Switch Root...
[   22.771280] systemd-journald[83]: Received SIGTERM from PID 1 (systemd).
[   23.008124] random: crng init done
[   23.947566] type=1403 audit(1522497143.654:2): policy loaded auid=4294967295 ses=4294967295
[   23.960236] systemd[1]: Successfully loaded SELinux policy in 632.315ms.
[   24.196964] systemd[1]: Relabelled /dev and /run in 35.649ms.

Welcome to CentOS Linux 7 (Core)!

[  OK  ] Stopped Switch Root.
[  OK  ] Stopped Journal Service.
         Starting Journal Service...
[  OK  ] Listening on udev Control Socket.
[  OK  ] Set up automount Arbitrary Executab...ats File System Automount Point.
         Starting Create list of required st... nodes for the current kernel...
[  OK  ] Stopped target Switch Root.
[  OK  ] Stopped target Initrd File Systems.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Stopped target Initrd Root File System.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
         Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
[  OK  ] Listening on LVM2 poll daemon socket.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on udev Kernel Socket.
         Starting Remount Root and Kernel File Systems...
         Starting Apply Kernel Variables...
[  OK  ] Reached target Timers.
[  OK  ] Reached target Swap.
         Mounting Temporary Directory...
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
         Mounting Huge Pages File System...
[  OK  ] Created slice system-anaconda\x2dtmux.slice.
         Mounting POSIX Message Queue File System...
         Mounting Debug File System...
[  OK  ] Created slice system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice.
[  OK  ] Reached target Paths.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Rebuild Hardware Database...
         Starting Configure read-only root support...
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started Configure read-only root support.
[  OK  ] Started LVM2 metadata daemon.
         Starting LVM2 metadata daemon...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Rebuild Hardware Database.
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
         Starting udev Wait for Complete Device Initialization...
         Starting Device-Mapper Multipath Device Controller...
[  OK  ] Started Device-Mapper Multipath Device Controller.
[  OK  ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Started udev Wait for Complete Device Initialization.
         Starting Activation of DM RAID sets...
[  OK  ] Started Activation of DM RAID sets.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Local File Systems.
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Rebuild Journal Catalog...
         Starting Import network configuration from initramfs...
         Starting Migrate local SELinux poli...tructure to the new structure...
[  OK  ] Started Rebuild Journal Catalog.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
         Starting Update is Completed...
[  OK  ] Started Update is Completed.
[  OK  ] Started Migrate local SELinux polic... structure to the new structure.
[  OK  ] Started Import network configuration from initramfs.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on Open-iSCSI iscsid Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Terminate Plymouth Boot Screen...
         Starting Dump dmesg to /var/log/dmesg...
[  OK  ] Started Anaconda NetworkManager configuration.
         Starting Anaconda NetworkManager configuration...
         Starting System Logging Service...
         Starting pre-anaconda logging service...
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
         Starting Hardware RNG Entropy Gatherer Daemon...
         Starting Wait for Plymouth Boot Screen to Quit...
         Starting Service enabling compressing RAM with zRam...
         Starting Login Service...
         Starting Network Manager...
Starting installer, one moment...
anaconda 21.48.22.121-1 for CentOS 7 started.
 * installation log files are stored in /tmp during the installation
 * shell is available on TTY2
 * when reporting a bug add logs from /tmp as separate text/plain attachments
11:52:53 Not asking for VNC because of an automated install
11:52:53 Not asking for VNC because text mode was explicitly asked for in kickstart

Starting automated install......
Checking software selection
Generating updated storage configuration
Checking storage configuration...

================================================================================
================================================================================
Installation

 1) [x] Language settings                 2) [x] Time settings
        (English (United States))                (Asia/Kolkata timezone)
 3) [x] Installation source               4) [x] Software selection
        (Local media)                            (Custom software selected)
 5) [x] Installation Destination          6) [x] Kdump
        (Automatic partitioning                  (Kdump is enabled)
        selected)
 7) [x] Network configuration
        (Wired (eth0) connected)
================================================================================
================================================================================
Progress
Setting up the installation environment
.
Creating disklabel on /dev/vda
.
Creating xfs on /dev/vda1
.
Creating lvmpv on /dev/vda2
.
Creating swap on /dev/mapper/centos-swap
.
Creating xfs on /dev/mapper/centos-root
.
Running pre-installation scripts
.
Starting package installation process
Preparing transaction from installation source
Installing libgcc (1/299)
Installing centos-release (2/299)
Installing grub2-common (3/299)
Installing setup (4/299)
Installing filesystem (5/299)
Installing basesystem (6/299)
Installing grub2-pc-modules (7/299)
Installing bind-license (8/299)
Installing ncurses-base (9/299)
Installing firewalld-filesystem (10/299)
Installing tzdata (11/299)
Installing glibc-common (12/299)
Installing nss-softokn-freebl (13/299)
Installing glibc (14/299)
Installing libstdc++ (15/299)
Installing ncurses-libs (16/299)
Installing bash (17/299)
Installing libsepol (18/299)
Installing pcre (19/299)
Installing libselinux (20/299)
Installing zlib (21/299)
Installing info (22/299)
Installing xz-libs (23/299)
Installing nspr (24/299)
Installing libuuid (25/299)
Installing nss-util (26/299)
Installing sed (27/299)
Installing libcom_err (28/299)
Installing popt (29/299)
Installing chkconfig (30/299)
Installing libdb (31/299)
Installing bzip2-libs (32/299)
Installing readline (33/299)
Installing grep (34/299)
Installing gawk (35/299)
Installing elfutils-libelf (36/299)
Installing libxml2 (37/299)
Installing libffi (38/299)
Installing libgpg-error (39/299)
Installing libattr (40/299)
Installing libacl (41/299)
Installing libcap (42/299)
Installing libcap-ng (43/299)
Installing audit-libs (44/299)
Installing libgcrypt (45/299)
Installing cpio (46/299)
Installing libnl3 (47/299)
Installing jansson (48/299)
Installing expat (49/299)
Installing dbus-libs (50/299)
Installing lua (51/299)
Installing which (52/299)
Installing diffutils (53/299)
Installing findutils (54/299)
Installing sqlite (55/299)
Installing file-libs (56/299)
Installing file (57/299)
Installing libmnl (58/299)
Installing nss-softokn (59/299)
Installing libnl3-cli (60/299)
Installing libassuan (61/299)
Installing p11-kit (62/299)
Installing cyrus-sasl-lib (63/299)
Installing e2fsprogs-libs (64/299)
Installing groff-base (65/299)
Installing xz (66/299)
Installing libgomp (67/299)
Installing libunistring (68/299)
Installing libidn (69/299)
Installing libedit (70/299)
Installing sysvinit-tools (71/299)
Installing pciutils-libs (72/299)
Installing ethtool (73/299)
Installing hostname (74/299)
Installing libnfnetlink (75/299)
Installing tcp_wrappers-libs (76/299)
Installing slang (77/299)
Installing newt (78/299)
Installing lzo (79/299)
Installing gdbm (80/299)
Installing keyutils-libs (81/299)
Installing libnetfilter_conntrack (82/299)
Installing iptables (83/299)
Installing iproute (84/299)
Installing less (85/299)
Installing libteam (86/299)
Installing ipset-libs (87/299)
Installing ipset (88/299)
Installing tar (89/299)
Installing acl (90/299)
Installing vim-minimal (91/299)
Installing libdb-utils (92/299)
Installing pinentry (93/299)
Installing libss (94/299)
Installing mozjs17 (95/299)
Installing kmod-libs (96/299)
Installing make (97/299)
Installing GeoIP (98/299)
Installing libselinux-utils (99/299)
Installing elfutils-default-yama-scope (100/299)
Installing elfutils-libs (101/299)
Installing freetype (102/299)
Installing ncurses (103/299)
Installing gmp (104/299)
Installing snappy (105/299)
Installing pth (106/299)
Installing numactl-libs (107/299)
Installing libverto (108/299)
Installing dmidecode (109/299)
Installing ustr (110/299)
Installing libsemanage (111/299)
Installing libtasn1 (112/299)
Installing p11-kit-trust (113/299)
Installing ca-certificates (114/299)
Installing openssl-libs (115/299)
Installing coreutils (116/299)
Installing krb5-libs (117/299)
Installing libblkid (118/299)
Installing python-libs (119/299)
Installing python (120/299)
Installing shadow-utils (121/299)
Installing gzip (122/299)
Installing cracklib (123/299)
Installing python-decorator (124/299)
Installing libmount (125/299)
Installing glib2 (126/299)
Installing shared-mime-info (127/299)
Installing libcroco (128/299)
Installing cracklib-dicts (129/299)
Installing libpwquality (130/299)
Installing pam (131/299)
Installing systemd-libs (132/299)
Installing procps-ng (133/299)
Installing python-pyudev (134/299)
Installing plymouth-core-libs (135/299)
Installing gettext-libs (136/299)
Installing gettext (137/299)
Installing dbus-glib (138/299)
Installing dbus-python (139/299)
Installing pkgconfig (140/299)
Installing gobject-introspection (141/299)
Installing python-gobject-base (142/299)
Installing yum-metadata-parser (143/299)
Installing libutempter (144/299)
Installing python-iniparse (145/299)
Installing pyliblzma (146/299)
Installing libselinux-python (147/299)
Installing python-slip (148/299)
Installing python-slip-dbus (149/299)
Installing python-firewall (150/299)
Installing python-linux-procfs (151/299)
Installing newt-python (152/299)
Installing python-configobj (153/299)
Installing python-schedutils (154/299)
Installing python-perf (155/299)
Installing pyxattr (156/299)
Installing grubby (157/299)
Installing openssl (158/299)
Installing bind-libs-lite (159/299)
Installing nss-pem (160/299)
Installing nss (161/299)
Installing nss-sysinit (162/299)
Installing NetworkManager-libnm (163/299)
Installing nss-tools (164/299)
Installing alsa-lib (165/299)
Installing binutils (166/299)
Installing logrotate (167/299)
Installing centos-logos (168/299)
Installing fipscheck (169/299)
Installing fipscheck-lib (170/299)
Installing libssh2 (171/299)
Installing libcurl (172/299)
Installing curl (173/299)
Installing rpm-libs (174/299)
Installing rpm (175/299)
Installing openldap (176/299)
Installing dhcp-libs (177/299)
Installing gnupg2 (178/299)
Installing libuser (179/299)
Installing util-linux (180/299)
Installing policycoreutils (181/299)
Installing openssh (182/299)
Installing selinux-policy (183/299)
Installing virt-what (184/299)
Installing gpgme (185/299)
Installing pygpgme (186/299)
Installing rpm-build-libs (187/299)
Installing rpm-python (188/299)
Installing dhcp-common (189/299)
Installing python-pycurl (190/299)
Installing python-urlgrabber (191/299)
Installing yum-plugin-fastestmirror (192/299)
Installing yum (193/299)
Installing mariadb-libs (194/299)
Installing kernel-tools-libs (195/299)
Installing libndp (196/299)
Installing libseccomp (197/299)
Installing libdaemon (198/299)
Installing teamd (199/299)
Installing qrencode-libs (200/299)
Installing libaio (201/299)
Installing device-mapper-persistent-data (202/299)
Installing libpipeline (203/299)
Installing libestr (204/299)
Installing lsscsi (205/299)
Installing libfastjson (206/299)
Installing hardlink (207/299)
Installing kpartx (208/299)
Installing device-mapper (209/299)
Installing device-mapper-libs (210/299)
Installing cryptsetup-libs (211/299)
Installing dracut (212/299)
Installing kmod (213/299)
Installing systemd (214/299)
Installing dbus (215/299)
Installing polkit (216/299)
Installing polkit-pkla-compat (217/299)
Installing iputils (218/299)
Installing initscripts (219/299)
Installing systemd-sysv (220/299)
Installing device-mapper-event-libs (221/299)
Installing wpa_supplicant (222/299)
Installing NetworkManager (223/299)
Installing os-prober (224/299)
Installing crontabs (225/299)
Installing cronie-anacron (226/299)
Installing cronie (227/299)
Installing grub2-tools-minimal (228/299)
Installing grub2-tools-extra (229/299)
Installing grub2-tools (230/299)
Installing grub2-pc (231/299)
Installing device-mapper-event (232/299)
Installing lvm2-libs (233/299)
Installing dhclient (234/299)
Installing dracut-network (235/299)
Installing ebtables (236/299)
Installing fxload (237/299)
Installing alsa-firmware (238/299)
Installing alsa-tools-firmware (239/299)
Installing hwdata (240/299)
Installing libpciaccess (241/299)
Installing libdrm (242/299)
Installing plymouth-scripts (243/299)
Installing plymouth (244/299)
Installing kbd-misc (245/299)
Installing linux-firmware (246/299)
Installing kbd-legacy (247/299)
Installing kbd (248/299)
Installing kernel (249/299)
Installing firewalld (250/299)
Installing kexec-tools (251/299)
Installing lvm2 (252/299)
Installing grub2 (253/299)
Installing NetworkManager-tui (254/299)
Installing NetworkManager-team (255/299)
Installing NetworkManager-wifi (256/299)
Installing audit (257/299)
Installing postfix (258/299)
Installing tuned (259/299)
Installing irqbalance (260/299)
Installing chrony (261/299)
Installing aic94xx-firmware (262/299)
Installing microcode_ctl (263/299)
Installing openssh-server (264/299)
Installing rsyslog (265/299)
Installing biosdevname (266/299)
Installing dracut-config-rescue (267/299)
Installing parted (268/299)
Installing iprutils (269/299)
Installing man-db (270/299)
Installing kernel-tools (271/299)
Installing selinux-policy-targeted (272/299)
Installing openssh-clients (273/299)
Installing authconfig (274/299)
Installing passwd (275/299)
Installing sudo (276/299)
Installing btrfs-progs (277/299)
Installing xfsprogs (278/299)
Installing e2fsprogs (279/299)
Installing libsysfs (280/299)
Installing iwl135-firmware (281/299)
Installing iwl3160-firmware (282/299)
Installing iwl7260-firmware (283/299)
Installing iwl6000g2b-firmware (284/299)
Installing iwl6050-firmware (285/299)
Installing iwl2030-firmware (286/299)
Installing iwl6000g2a-firmware (287/299)
Installing iwl5000-firmware (288/299)
Installing rootfiles (289/299)
Installing ivtv-firmware (290/299)
Installing iwl1000-firmware (291/299)
Installing iwl100-firmware (292/299)
Installing iwl4965-firmware (293/299)
Installing iwl5150-firmware (294/299)
Installing iwl7265-firmware (295/299)
Installing iwl2000-firmware (296/299)
Installing iwl105-firmware (297/299)
Installing iwl3945-firmware (298/299)
Installing iwl6000-firmware (299/299)
Performing post-installation setup tasks
Installing boot loader
.
Performing post-installation setup tasks
.

Configuring installed system
.
Writing network configuration
.
Creating users
.
Configuring addons
.
Generating initramfs
.
Running post-installation scripts
.
        Use of this product is subject to the license agreement found at /usr/share/centos-release/EULA

Accessing vm

CentOS Linux 7 (Core)
Kernel 3.10.0-693.el7.x86_64 on an x86_64

localhost login: root
Password: 
[root@localhost ~]# free -h
              total        used        free      shared  buff/cache   available
Mem:           488M        106M        244M        4.3M        137M        332M
Swap:          1.0G          0B        1.0G
[root@localhost ~]#